+(91)-9604149072

info@alproequipments.com

Tray Dryer

Description:

1) CONSTRUCTION: EXTERNAL:2MM THKINTERNAL:2MM 
THKMOC: cGMP

2) SURFACE FINISH : EXTERNAL: Buffed to 150 grit matt finish INTERNAL: Buffed to 220 grit mirror finish. 

3) INLET & OUTLET: All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet.

4) DOOR:
 Doors at provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.

5) AIR CIRCULATION: Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer.

6) HEATING: Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / clarifiers are provided in the dryers.

7) TEMPERATURE CONTROL: Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.

8) TRAYS: Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropylene / Frp/ M.S. galvanized as per clients requirements.

9) TROLLEY: Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.

10) CONTROL PANEL : Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.

Technical Specification

MODELS

TD-12

TD-24

TD-48

TD-96

Loading capacity

12 Trays

24 Trays

48 Trays

96 Trays

External Dimension in mm

W D H 1370x530x 940

W D H 
1370x940x 940

W D H
1980x1020x1880

W D H
3320x1900x1880

Internal Dimension In mm

840x 430 x 840

840x860x840

1020 x930 x1830

1960 x930 x1830

No of Doors

One

One

One

Two

No of Blowers

One

Two

One

Two

No of motors/H.P.3 PHASE 415 VOLTS.

1/0.5 H.P./3 phase 415 volts.

1/0.5 H.P./3 phase 415 volts

1/1 H.P./3 phase 415 volts

2/1 H.P./3 phase 415 volts

Electrical Heating Load for100°C/200°C/300°C

3kw/6kw/9kw

6kw/9kw/12kw

9kw/15kw/18kw

15kw/21kw/27kw

Steam Heater No. of coils.

2

2

2

2

Steam Pressure

3.3 kg/cm2

3.3 kg/cm2

3.3 kg/cm2

3.3 kg/cm2

Steam consumption

25 LBS/hr

45 LBS/hr

60 LBS/hr

80 LBS/hr

Insulation 
in mm100°C/200°C/300°C

50/75/75

50/75/75

50/75/75

50/75/75

No of Trolleys

Rack System

Rack System

One

Two

Tray Size

812x 406 x 31

812x 406 x 31

812x 406 x 31

812x 406 x31

Trolley Dimension

Fixed Racks

Fixed Racks

840x960x1780

840x960x1780